Jomar Corp. Showroom

Enhanced Injection-Blow Machine In Servohydraulic and Hybrid Versions

NPE2024: Jomar is showing its 85-S GEN II machine with beefed-up specs in standard servohydraulic version and brand-new hybrid model.

How Was K 2022 for Blow Molding?

Over a dozen companies emphasized sustainability with use of foam and recycle, lightweighting and energy savings, along with new capabilities in controls, automation and quick changeovers.

As Currier Grows in Medical Consumables, Blow Molding Is Its ‘Foot in the Door’

Currier Plastics has added substantial capacity recently in both injection and blow molding for medical/pharmaceutical products, including several machines to occupy a new, large clean room.

Beefed-Up Injection-Blow Machine at K 2022

Jomar’s new 85-S Gen II IBM press has increased clamp tonnage and trigger-bar length, along with precise, efficient digital hydraulics.

Jomar Enters Extrusion Blow Molding Market

Jomar complements its injection-blow line with exclusive distribution of Automa by Magic extrusion blow machines.

Blow Molding: Something for Everyone at K Show

Packaging, industrial, continuous-extrusion, accumulator-head, injection-blow, stretch-blow, EPET, foam, sandwich co-injection—the blow molding news was wide ranging at K 2019.

Blow Molding: Entry-Level Injection-Blow Machine

Jomar’s smallest machine, priced for first-time users, now has greater capacity.

K 2019 Preview: Blow Molding Exhibits Focus on Recycling & PET

Spotty information from blow molding machinery exhibitors indicates that the “Circular Economy” will be a recurrent theme and that PET processing will predominate.

VFD or Servo Drive for Energy-Saving Hydraulics? Why Not Both?

New VFD from Bosch Rexroth at NPE2018 illustrates the merits of VFD versus servo drive for hydraulic pumps.

NPE Wrap-Up: News in Primary Machinery, Part 1

Rounding up details from the Big Show not previously reported in all our other coverage, here’s more news in injection and blow molding, extrusion and compounding. Next month, we’ll conclude with recycling/scrap reclaim, robots, tooling, auxiliary equipment, materials and additives.

News Highlights from NPE2018

Developments in Industry 4.0, multi-layer preform molding, automation, LSR processing, and PP were among the major newsbreakers at May’s show. And one film processor finalized purchases of 13 new lines.

Blow Molding: They Said It Couldn’t Be Done

At the recent NPE2018 show in Orlando, Fla., Jomar Corp., Pleasantville, N.J., may have opened some eyes to the unsuspected capabilities of injection-blow molding.

‘Smart Data’: The Rise of the ‘Dashboards’

For North American plastics processors, NPE2018 offered the broadest exposure yet to the bundle of trends and technologies known as Industry 4.0 or the Industrial Internet of Things (IIOT).

NPE2018 New Technology Focus: All-Electrics Multiply in Blow Molding

All-electric shuttles and injection-blow machines continue to proliferate.

Injection-Blow Molding Line Gets a Technology Makeover

Jomar is adding servo-hydraulic drives and Industry 4.0 capabilities to established workhorse machines.

NPE2018 New Technology Focus: The ‘4.0’ Revolution

Injection and blow molding and robot suppliers are making Industry 4.0 the most prevalent theme of the show.

Blow Molding: Injection-Blow Molder Gets a Speed Boost

Closed-loop hydraulics trim dry-cycle times of Jomar’s mid-size injection-blow molder.

Injection-Blow Machines with Energy-Saving Servo-Hydraulics

Jomar’s IntelliDrive servo-hydraulic pump brings major energy savings to injection-blow molding.

Blow Molding: New Machines Take on Challenging Shapes

From very small to very large, from hotel amenity bottles to automotive jounce bumpers, new and upgraded machines tackle difficult jobs while improving productivity, quality, and energy efficiency.

K 2016 Preview: Blow Molding

Looking for speed and energy efficiency? Take your pick of new all-electric, hybrid, and servo-hydraulic machines.

Blow Molding News at K 2013

All-electric machines of all types were the stars of the show, but there were a number of other noteworthy developments.

K 2004 News Preview: Blow Molding

One of the most interesting innovations in blow molding at K 2004 will be a top-and-bottom blowing system that is said to double bottle output.

Blow Molding - Higher Output Vies With Flexibility

The emphasis in blow molding equipment introductions at NPE 2003 is on higher output capability and greater versatility to take on emerging markets.

Blow Molding (K 2001 Preview)

One cluster of blow molding innovations on display at K 2001 will address the need for more versatile single-stage injection stretch-blow molding (ISBM) machines. A thirst for energy savings underlies plans to launch all-electric units for PET and HDPE containers. Also in the limelight are advances in large-part technical blow molding.

��ý

Jomar Corp.

CONNECT

About Jomar Corp.

IS THIS YOUR COMPANY?

As Seen On Plastics Technology

Jomar Corp. Supplies the Following Products

Editorial, News, and Products

Enhanced Injection-Blow Machine In Servohydraulic and Hybrid Versions

How Was K 2022 for Blow Molding?

As Currier Grows in Medical Consumables, Blow Molding Is Its ‘Foot in the Door’

Beefed-Up Injection-Blow Machine at K 2022

Jomar Enters Extrusion Blow Molding Market

Blow Molding: Something for Everyone at K Show

Blow Molding: Entry-Level Injection-Blow Machine

K 2019 Preview: Blow Molding Exhibits Focus on Recycling & PET

VFD or Servo Drive for Energy-Saving Hydraulics? Why Not Both?

NPE Wrap-Up: News in Primary Machinery, Part 1

News Highlights from NPE2018

Blow Molding: They Said It Couldn’t Be Done

‘Smart Data’: The Rise of the ‘Dashboards’

NPE2018 New Technology Focus: All-Electrics Multiply in Blow Molding

Injection-Blow Molding Line Gets a Technology Makeover

NPE2018 New Technology Focus: The ‘4.0’ Revolution

Blow Molding: Injection-Blow Molder Gets a Speed Boost

Injection-Blow Machines with Energy-Saving Servo-Hydraulics

Blow Molding: New Machines Take on Challenging Shapes

K 2016 Preview: Blow Molding

Blow Molding News at K 2013

K 2004 News Preview: Blow Molding

Blow Molding - Higher Output Vies With Flexibility

Blow Molding (K 2001 Preview)

����ý

Jomar Corp.

CONNECT

About Jomar Corp.

IS THIS YOUR COMPANY?

As Seen On Plastics Technology

Jomar Corp. Supplies the Following Products

Editorial, News, and Products

Enhanced Injection-Blow Machine In Servohydraulic and Hybrid Versions

How Was K 2022 for Blow Molding?

As Currier Grows in Medical Consumables, Blow Molding Is Its ‘Foot in the Door’

Beefed-Up Injection-Blow Machine at K 2022

Jomar Enters Extrusion Blow Molding Market

Blow Molding: Something for Everyone at K Show

Blow Molding: Entry-Level Injection-Blow Machine

K 2019 Preview: Blow Molding Exhibits Focus on Recycling & PET

VFD or Servo Drive for Energy-Saving Hydraulics? Why Not Both?

NPE Wrap-Up: News in Primary Machinery, Part 1

News Highlights from NPE2018

Blow Molding: They Said It Couldn’t Be Done

‘Smart Data’: The Rise of the ‘Dashboards’

NPE2018 New Technology Focus: All-Electrics Multiply in Blow Molding

Injection-Blow Molding Line Gets a Technology Makeover

NPE2018 New Technology Focus: The ‘4.0’ Revolution

Blow Molding: Injection-Blow Molder Gets a Speed Boost

Injection-Blow Machines with Energy-Saving Servo-Hydraulics

Blow Molding: New Machines Take on Challenging Shapes

K 2016 Preview: Blow Molding

Blow Molding News at K 2013

K 2004 News Preview: Blow Molding

Blow Molding - Higher Output Vies With Flexibility

Blow Molding (K 2001 Preview)

��ý