´óÏó´«Ã½

Nordson will debut an automated lip adjustment system for its EDI extrusion and fluid-coating dies at the K 2022 trade fair. Called the EDI Prodigi System, it relies on motorized actuators to control the lip adjustment, and reportedly achieves saving tolerances four times faster than conventional thermal bolt systems.

For years, automated lip adjustment has been achieved using thermally actuated bolts. Thermal bolts are highly influenced by external factors, so thickness uniformity and consistency are sometimes hard to realize. Thermal bolts also typically require manual pre-tuning, so the process is not fully automated and hard to repeat consistently. Though effective and proven, it became clear that manufacturers needed a next level solution to meet their production needs.

Featured Content

A Simpler Way to Calculate Shot Size vs. Barrel Capacity READ MORE

Automatic Conveying with AI Optimization READ MORE

A Purge Solution for the Blow Molding and Compounding Industries READ MORE

“When we spoke with global customers, it was clear that they need more than excellent product uniformity — they need increased automation, says Scott Smith, global product managing director for Nordson’s EDI die ´óÏó´«Ã½. “When skilled workers are hard to find, straightforward process control with less operator intervention is key to increasing a production line’s overall profitability. We knew there must be a better way.”

Photos: Nordson

After an initial concept was developed and specified, Nordson selected the Proflow family of actuators by team to bring the new Prodigi die to market as quickly as possible. The installed actuators smoothly translate motor rotation into precise linear movement to locally open and close the lip. Accomplishing this away from the hot die, at a user interface, creates a process that is much faster, safer, and more energy efficient.

To evaluate the system, Nordson conducted a series of extrusion and fluid coating trials at its EDI Technology Center in Chippewa Falls, Wis., as well as a series of extrusion trials at the Fulton, N.Y., laboratory of Davis-Standard LLC.

“We achieved great results when we evaluated this new technology,” says Sam Iuliano, EDI chief technologist. "During our initial lip gap setting trials at Davis-Standard, we successfully closed the lip by 0.015 in. in only 35 sec. With a conventional automatic die, this procedure would involve using feeler gauges and iterative manual adjustments, which, in stark contrast, takes about 15 minutes to complete with reasonable accuracy."

The first round of tests at Davis-Standard, using multiple LyondellBasell resins and an NDC Technologies scanning system, also clearly showed how beneficial the Prodigi system is when it comes to both product uniformity and control speed.

Says Iuliano, "We set the desired lip gap, and when we started, the initial thickness variation was ±25%. Within a matter of 44 sec, the thickness variation decreased significantly, and after only three minutes from engaging Automatic Profile Control (APC), we had an almost perfect gauge over the complete length of the die. This compares to an average of 12 minutes to achieve the same tolerances using conventional thermal actuators. Customers will save significant time and be able to exactly repeat their production cycles. This will create much less scrap and add more productive time since final tolerances are achieved so quickly.”

“We have tested the Prodigi die system in comparison to current thermal bolt dies and the Prodigi system has proven to raise the performance bar an order of magnitude,” says Ricky Keller, v.p. market development with Davis-Standard’s Converting Systems line of ´óÏó´«Ã½. I have witnessed step changes in APC over the past 40 years and the Prodigi system is definitely a large step forward for profile control of flat dies.”

“Throughout the trials, we were impressed by how fast the Prodigi™ die system is. We launched a saved lip profile recipe from a previous run and produced exceptionally flat film in only 30 seconds,” says Iuliano. “Davis-Standard stated that they usually need 8 min. to achieve the same tolerances from recipe launch with conventional thermal actuators.”

To gain a processor’s perspective, global packaging supplier Amcor was also invited to the development trials. “The performance of the Prodigi die, with its reproducibility and speed, will be a game changer for converters, reports Brent Martins, R&D Fellow with Amcor PLC. “We are always looking for tools to help reduce losses and improve our Overall Equipment Effectiveness as we move toward shorter runs. This new technology from Nordson will enable converters to achieve these goals safely and efficiently.”

The Prodigi system will also support fluid coating applications since its accuracy is so refined. “The coating line tests in our lab were extremely promising, and we will be able to support fluid coating customers with equally impressive results,” notes Iuliano.