Coinjected Coffee Capsules with IML Debut at Fakuma Show
Netstal premieres coinjection molding of three-layer coffee capsules with in-mold labeling.
At the Fakuma show this month in Germany, Netstal (U.S. office in Florence, Ky.) will unveil a world premiere of a system for coinjection (sandwich) molding of three-layer coffee capsules with in-mold labeling (IML). The PP/ EVOH/PP capsules provide barrier to oxygen, light, and moisture to preserve the coffee’s aroma. Current single-layer capsules of PP or PLA require secondary packaging for barrier protection.
Produced in a four-cavity test mold from Fostag of Switzerland, the capsules weigh just 1.35 g. They have an overall wall thickness of 0.4 mm, with two PP layers of 0.17 mm and an EVOH barrier layer of 0.06 mm. They will be molded on an all-electric Netstal Elion 1200 press (120 metric tons) with a vertically mounted auxiliary injector from Plasdan of Portugal.
The IML automation is provided by Beck Automation of Switzerland, which recently completed a 32-cavity version of this system. “With such small package sizes, the challenge lies in label-inserting precision,” says Nino Zehnder, head of sales for Beck Automation.
“We are talking about very small labels and ultra-lightweight components” at very high output rates. Overall cycle time is around 4.9 sec.
Related Content
-
Is There a More Accurate Means to Calculate Tonnage?
Molders have long used the projected area of the parts and runner to guesstimate how much tonnage is required to mold a part without flash, but there’s a more precise methodology.
-
Got Streaks or Black Specs? Here’s How to Find and Fix Them
Determining the source of streaking or contamination in your molded parts is a critical step in perfecting your purging procedures ultimately saving you time and money.
-
Understanding the Effect of Pressure Losses on Injection Molded Parts
The compressibility of plastics as a class of materials means the pressure punched into the machine control and the pressure the melt experiences at the end of fill within the mold will be very different. What does this difference mean for process consistency and part quality?
