´óÏó´«Ã½

Among a wide-ranging miscellany of new standard mold components at the recent Fakuma show in Germany, a couple stood out. One was stack-mold actuator systems. Hasco (U.S. office in Fletcher, N.C.) introduced the Module 2.5, a smaller version of the Module 4 introduced at K 2016. There’s now also a larger Module 5. They have DLC-coated slideways and low height to accommodate smaller tiebar distances.

Another new product of this type is the E 8630 from Meusburger (U.S. office in Charlotte, N.C.). It comes with DLC-coated slideways, through-hardened gear teeth, a choice of gear racks from 800 to 1200 mm, and a software “wizard” to help users calculate the length needed.

Featured Content

How Vacuum Drying Is Revolutionizing Plastics Processing READ MORE

ColorForm From KraussMaffei Brings Key Competencies to One System READ MORE

A Simpler Way to Calculate Shot Size vs. Barrel Capacity READ MORE

Another category of new products are mold monitors. Hasco has a new round cycle counter, which simplifies installation, since the mold maker can use a round cutter to make a pocket, rather than having to mill a square pocket.

Progressive Components, Wauconda, Ill., continues to improve its CVe Live remote mold monitor. An enhanced online dashboard provides a snapshot of a company’s entire fleet of tools. A customizeable tool tab displays mold information and performance metrics, such as efficiency and cycle-time averages for the trailing hour, 24 hr, and week. Presses can now be assigned to a tablet, providing a portable and simplified interface to enter rejects and downtime codes. There’s also a new Exceptions Dashboard for manufacturing cells (intended for display on a large screen), which keeps track of any exceptions that occur on the machines assigned to the dashboard. And a Data Transfer option allows any data collected by the CVe Live to be manually or automatically outputted to an Excel or JSON file, simplifying data transfer to existing systems.

A new player in the mold-monitor market is moldmaker Haidlmair of Austria and Concord, Ont. Its Mold Monitoring 4.0 system uses a box on each mold half to collect and upload to the cloud data on parts produced, cycle time, water temperature and flow rate, cavity pressure, and more. The mold can also send out warnings when critical parameters deviate from permissible limits and send notifications when the tool needs maintenance or service. Haidlmair has four molds in testing since the end of 2016.

In other components, Hasco offers a new Z1790/1791 round latch lock, which is compact and mounted not on the side of the mold, but inside the tool, out of the way where it is not easily damaged. Stroke is adjusted by means of a screw at the back, not by machining.

For plugging cooling channels, moldmakers normally use threaded plugs. A more compact solution is Hasco’s new Z9430 copper sealing disc, which has no threads and is quickly and inexpensively driven into the channel by a Z9431 fitting mandrel.

Other new Hasco components were reported in an October Keeping Up, but the company has also launched an update of its customer portal, which now allows ordering of products from the company’s 100,000-item catalog and provides an online check of whether the item is in stock and also provides individual customer prices, not list prices. The portal provides CAD data and drawings in many formats. There’s also a new mold-base assistant configurator that provides not only standard configurations but allows the user to configure a customized mold base in as little as 2 min—said to be unique in the world. With drag-and-drop, users can configure bases for stack molds, stripper-plate molds, and double-ejection tools. Configurations can be saved for repeat use. Also configurable in the portal are ejector pins, cut to length in a choice of two tolerances.

Meusburger also brought out several new standard components:

• E 3064 guide for an angled pin requires only conventional machining for a rectangular pocket, with no angling of the cavity plate.

• E 1830 ejector-set push-back unit allows the ejector set to move only after a defined opening stroke of the mold. Adjustable components allow setting the stroke length.

• E 2752 combination cable for hot runners includes both thermocouple and heater-power lines. Shielded sensor lines provide reliable signal transmission.

• E 1307 flat mold-base centering unit with DLC coating is said to be very compact and to provide optimal compensation for thermal expansion between the insert and cavity plate with milled pocket, due to centering directly on the cavity.

• E 13045 compact top lock with DLC coating provides for easy installation through vertical machining, from the split-line face, in one operation.