Materials: LSR Grades Offer Low-Temperature Curing, Primerless Adhesion to Copolyester
Curing at a lower temperature makes it feasible to overmold the materials onto heat-sensitive substrates, including copolyesters.
Two new Dow Corning QP1-33X0 liquid silicone rubber (LSR) grades and new Dow Corning QP1-5040 self-adhesive LSR grades were launched by Dow Medical Solutions, a ´óÏó´«Ã½ unit of the DowDuPont Specialty Products Division. Each is a low-temperature cure (LTC) technology.
At the MD&M West 2018 show in Anaheim, Dow Corning officials said the company has been collaborating with Eastman Chemical, manufacturer of the popular Tritan copolyester to tailor the LSR and develop a data set for combining the materials. Company representatives said that the collaboration with Eastman goes beyond product design to processing parameters, including proper molding, drying, and handling to determine how those factors can impact adhesion.
In addition to allowing overmolding with heat-sensitive substrates, Dow Corning said QP1-33X0 LSR allows fast injection speeds under low injection pressures. Those lower pressures and temperatures are growing more important as LSRs are increasingly used to encapsulate sensitive electronics in wearable devices.
In addition, Dow Corning representatives said they have seen improved thick section cure rates during testing with a faster overall cure reaction. At this time, the company is working on biocompatibility testing but it has already received positive cytotoxicity results. In terms of hardness, there is currently a 40 durometer grade, with a 30 durometer and others in the works.
Related Content
-
Latest Data on Bottled Water Shows Continued Strong Growth
Bottled water’s volume surpassed soft drinks for the first time in 2016 and has done so every year since.
-
Multilayer Solutions to Challenges in Blow Molding with PCR
For extrusion blow molders, challenges of price and availability of postconsumer recycled resins can be addressed with a variety of multilayer technologies, which also offer solutions to issues with color, processability, mechanical properties and chemical migration in PCR materials.
-
Get Color Changes Right In Extrusion Blow Molding
Follow these best practices to minimize loss of time, material and labor during color changes in molding containers from bottles to jerrycans. The authors explore what this means for each step of the process, from raw-material infeed to handling and reprocessing tails and trim.
