����ý

Wittmann Battenfeld is introducing the Tempro basic Large 120 temperature controller at Fakuma (Oct. 12-16; Friedrichshafen, Germany; Hall B1, Booth No. 1204) with a maximum heating capacity of 36 kW. Wittmannn says that capacity can ensure an optimal heating time, especially in instances where very fast heating is necessary—like after a mold change.

To further support homogenous heat transfer, the Tempro basic Large 120 can be optionally equipped with a new frequency-controlled pump. This pump model, known as the SpeedDrive, comes with an output of 4 kW and can handle a maximum flow rate of 300 l/min (79 gpm), generating a maximum pressure of 5 bar (72.5 psi). With the SpeedDrive pump, users can establish parameters for further process regulation, including motor speed, flow rate, pump pressure and differential temperature. This includes automatic adjustment of the parameter settings within a preestablished tolerance margin.

Wittmann says the Tempro basic Large 120 was developed in response to a growing demand in the market for fast heating of large molds, while still meeting high cooling performance standards. As an example of the unit’s cooling performance, Wittmann notes it has achieved a differential temperature of 60C (140F) between mold water and cooling water from a high cooling performance of 175 kW. As an additional option, a stainless steel vortex flow measurement device is available for the temperature controller, with a measurement range from 20 to 400 l/min (5 to 106 gpm).