´óÏó´«Ã½

Published

Positive Signs for Appliance Production

Reshoring and an improved housing market bode well for appliances.

Share

Appliance production contracted for a roughly six-year stretch from mid-2005 to early 2012. But since then, thanks to significant reshoring of appliance production and an improved housing market, appliances have been growing at a very significant and accelerating rate. Significant growth should continue in 2016. Let’s see why.

Real 10-Year Treasury Rate. The real (inflation-adjusted) 10-yr U.S. Treasury bond rate was 1.45% in February. This was the lowest it had been since last May, and it was the second month in a row that the real rate was below 2%. Since the Fed announced it was raising its overnight rate, the real 10-yr Treasury rate has dropped in each of the last three months. Apparently, the market does not see things the same way as the Fed. The change in the real 10-yr Treasury rate increased at a slower rate for the second consecutive month, indicating a slowing rate of increase in interest rates compared with one year ago.

While the change in the real rate increased at a slower rate, the change in the nominal rate actually went down, indicating that the nominal rate was lower than it was one year ago. The difference is inflation. The current average annual inflation rate in February was still much lower than it was a year ago.

Housing Permits. There were 83,800 housing permits filed in February. That’s up 8.1% from a year ago. This was the fourth month in a row that housing permits increased month-over-month. And the annual rate of growth accelerated for the fourth month in a row, too. The current rate of annual growth of 11.6% is the fastest since April 2014. This is a very positive sign for appliance manufacturing, since new homes demand a significant number of new appliances.

Real Appliance Spending. Consumer spending on appliances set a new all-time high in almost every single month in 2015. After a significant contraction in spending from 2007 to mid-2010, appliance spending has been growing at a very strong rate ever since. Historically, the average growth rate is 4%. But the month-over-month rate of growth has been faster than that in every month but two since January 2013.

The month-over-month growth rate in February was 7.8%, which was the fastest growth since last July. The rate of growth had accelerated since December, compared with August through November. As a result, while the annual rate of change has grown at a decelerating rate, the rate of change may be near a bottom and ready to grow faster once again.

Appliance Industrial Production. Production has been growing since May 2012. From December 2015 to February 2016, the month-over-month rate of growth in appliance production accelerated. The trends in the interest rate, housing permits, and appliance spending indicate that the annual rate of change in appliance production should begin to grow at an accelerating rate very soon. 

ABOUT THE AUTHOR

Steven Kline Jr. is part of the fourth-generation ownership team of Cincinnati-based Gardner Business Media, which is the publisher of Plastics Technology. He is currently the company’s director of market intelligence. Contact: (513) 527-8800  email:skline2@gardnerweb.com 
blog: gardnerweb.com/economics/blog

Process Cooling

Related Content

Architectural Mesh Made from Covestro’s Bioattributed PC

Kaynemaile’s new RE8 Architectural Mesh will deliver an ISCC Plus certified sustainable share of up to 88% of its architectural product.

Read More
Commodity Resins

PS Prices Plunge, Others Appear to Be Bottoming Out

PS prices to see significant drop, with some potential for a modest downward path for others. 

Read More

EV Chargers Made From Renewable PC

SABIC is enabling Charge Amps to manufacture electric vehicle (EV) chargers with a housing made from certified renewable PC, a first for the industry.  

Read More
NPE

Infrastructure May Prove Big Landing Spot for Recycled Plastics

As the government funds infrastructure improvements, a hot topic at NPE2024 – exploration of the role recycled plastics can play in upcoming projects, particularly road development. 

Read More

Read Next

NPE

Beyond Prototypes: 8 Ways the Plastics Industry Is Using 3D Printing

Plastics processors are finding applications for 3D printing around the plant and across the supply chain. Here are 8 examples to look for at NPE2024.

Read More
NPE

See Recyclers Close the Loop on Trade Show Production Scrap at NPE2024

A collaboration between show organizer PLASTICS, recycler CPR and size reduction experts WEIMA and Conair recovered and recycled all production scrap at NPE2024.

Read More