´óÏó´«Ã½

Published

Printpak Spearheads Local Effort to Recycle Rigid Plastics

Processor's study shows recycling stream would increase by 20% if rigid plastics were included.

Share

 

At a time when plastics are being challenged on a regular basis by governments, James City County in Virginia along with three other and Virginia municipalities have joined the ranks of more-progressive lawmakers by making accommodations for their residents to include rigid plastics in their curbside pickup for recycling.

 

Starting in July 2014, residents in these areas will be able to include plastics like yogurt cups and grocery store clam shells, among other plastic containers in their recycling bins.

 

The initiative was driven by , and Jamie Clark, its v.p. and GM.  One of Printpack’s U.S.- based rigid plastics processing plants, which produces sheet rollstock and a variety of barrier PET-based cups for applesauce, pudding, tuna and a variety of other applications, is located within James City County, where Clark also calls home.  As an officer of the Society of the Plastics Industry (SPI) and the chairman of the SPI’s Rigid Plastics Packaging Group (RPPG), Clark helped support a study on rigid plastics recovery within the county.

 

The Virginia Public Service Authority (VPPSA),  which manages curbside collection for the four municipalities, led the initiative with support from Printpack and RPPG.  The study showed when households were asked to recycle all of their rigid plastics, the entire quantity of recyclables went up by 20% with polypropylene and non-bottle PET making up the majority of the increase. Even PET bottles, which are already included in the program, saw a substantial bump. 

 

National recycling statistics show a trend in improvements in the recovery stream for rigid plastics.  Non-bottle rigid plastic recovery has increased threefold since 2007 to 2011 from about 325 million lb to 934 million lb.  In addition, the ratio of materials staying in Canada and the U.S. as opposed to shipping to other countries has increased from 37% to 61%, which is higher than aluminum and paper.

 

Initially, the VPPSA was reluctant when collection of all rigid plastics for recovery had originally been put on the table for discussion, Clark recalls. The market for mixed plastic seemed to be centered overseas, and VPPSA wanted assurances that if it were collected, it would actually be recycled.  Traditionally, the only plastic material they accepted was PET bottles and HDPE jugs with necks.

 

As the project progressed, VPPSA put their contract for collection out to bid.  But they did not include all rigid plastics in the RFQ because they were concerned that there wasn’t enough economic incentive to collect the material. VPPSA was also concerned that they might even see cost increases if they included all rigids.

 

After extensive research on this matter, Jamie Clark ensured them that the domestic market was developing to handle this type of recovery. “The expanded recycling won’t cost the localities more nor require a change in the regional contract.  There is enough market for the materials that contractors seem to be looking for more of this mixed plastic to buy,”  Clark states. He adds, “The scale of manufacturing in China shows the level of polypropylene consumed is three to four times of that in the U.S.  We should not be surprised that Asia has high demand for this raw material. This is a good thing.”

 

HAMMERING OUT THE DETAILS

 

This past January, Printpack executives and representatives from the SPI, the Southeast Recycling Development Council, County Waste, the MRF (the company that won the bid), and James City County’s Economic Development and General Services Departments met to work out the program’s details. “The meeting was targeted to roll up our sleeves and figure out how to expand plastics recycling locally,” said Clark.  County Waste came in with the attitude of, ‘we’re ready to do it, we’re already doing it elsewhere, so let’s roll.’ County Waste clearly understood that maximizing collection and recycling of all rigid plastics was profitable.

 

James City County Economic Development Group was instrumental in aligning the parties and moving this initiative forward.  Clark added, “There is good reason that Forbes Magazine ranked Virginia the best state for Business in 2013.”

 

Citizens of the county can expect a simple procedure of simply separating out their plastics in a separate bin to be picked up with regular waste disposal.  With local industries and citizens at large aligned, this no cost solution to aid in the recovery of plastics is projected to be a hit in this community.

Process Cooling
Blending & Dosing

Related Content

Extrusion

What to Know About Your Materials When Choosing a Feeder

Feeder performance is crucial to operating extrusion and compounding lines. And consistent, reliable feeding depends in large part on selecting a feeder compatible with the materials and additives you intend to process. Follow these tips to analyze your feeder requirements.

Read More
Extrusion

Why Are There No 'Universal' Screws for All Polymers?

There’s a simple answer: Because all plastics are not the same. 

Read More
Extrusion

How To Identify Resin Degradation in Single-Screw Extruders

Degradation can occur in many single-screw extrusion operations, and typically occurs due to minor design flaws in the screw. Here is how to track it down.  

Read More
best practices

Roll Cooling: Understand the Three Heat-Transfer Processes

Designing cooling rolls is complex, tedious and requires a lot of inputs. Getting it wrong may have a dramatic impact on productivity.

Read More

Read Next

NPE

For PLASTICS' CEO Seaholm, NPE to Shine Light on Sustainability Successes

With advocacy, communication and sustainability as three main pillars, Seaholm leads a trade association to NPE that ‘is more active today than we have ever been.’    

Read More
Automation

People 4.0 – How to Get Buy-In from Your Staff for Industry 4.0 Systems

Implementing a production monitoring system as the foundation of a ‘smart factory’ is about integrating people with new technology as much as it is about integrating machines and computers. Here are tips from a company that has gone through the process.

Read More
NPE

See Recyclers Close the Loop on Trade Show Production Scrap at NPE2024

A collaboration between show organizer PLASTICS, recycler CPR and size reduction experts WEIMA and Conair recovered and recycled all production scrap at NPE2024.

Read More