Check Out the New Purging Compounds Knowledge Center
Get expert advice on how to solve black specks, color streaks and other quality problems.
Earlier this month we launched a new Knowledge Center on the Plastics Technology website. Sponsored by Asaclean, this Knowledge Center focuses on the matter of purging.
Whether you run a single extruder in a university lab, or 30 injection molding presses in a Tier 1 automotive supplier, sooner or later you will need to purge your machine. Some of these reasons are beyond your control, but one thing for certain is: which material you use to purge your screw and barrel.
Navigate this Knowledge Center and tap into information on purging compound basics, purging for injection molding and extrusion, purging tips on hot runners, and troubleshooting. There’s also a FAQ section and a place where you can direct a specific purging questions to an Asaclean expert.
Related Content
-
Optimizing Pack & Hold Times for Hot-Runner & Valve-Gated Molds
Using scientific procedures will help you put an end to all that time-consuming trial and error. Part 1 of 2.
-
Back to Basics on Mold Venting (Part 2: Shape, Dimensions, Details)
Here’s how to get the most out of your stationary mold vents.
-
Is There a More Accurate Means to Calculate Tonnage?
Molders have long used the projected area of the parts and runner to guesstimate how much tonnage is required to mold a part without flash, but there’s a more precise methodology.
