Nanolayers Come to Tubing
Nanolayer technology, an active area of development in films, is also making its way to tubing extrusion.
Nanolayer technology, an active area of development in films, is also making its way to tubing extrusion. Guill Tool & Engineering, W. Warwick, R.I., recently introduced the patented NanoFlow die, which can create more than 1000 layers from a single extruder in thicknesses in the micron (1 millionth of a meter) to nanometer (1 billionth of a meter) range. The tool allows processors to save money by making more judicious use of expensive resins. Nanolayers are also said to produce tubing with increased impact and fracture toughness and/or tear strength. Brittle materials prone to cracking can be combined with soft ductile layers to limit crack propagation. What’s more, barrier properties can reportedly be better engineered by designing them as the thinnest possible layers, which will force materials to crystallize and thereby enhance their performance.
Related Content
-
How to Select the Right Tooling for Pipe Extrusion
In pipe extrusion, selecting or building a complementary set of tooling often poses challenges due to a range of qualitative factors. Here’s some guidance to help you out.
-
Troubleshooting Screw and Barrel Wear in Extrusion
Extruder screws and barrels will wear over time. If you are seeing a reduction in specific rate and higher discharge temperatures, wear is the likely culprit.
-
How To Identify Resin Degradation in Single-Screw Extruders
Degradation can occur in many single-screw extrusion operations, and typically occurs due to minor design flaws in the screw. Here is how to track it down.
