Is rPET OK for Hot-Fill Bottles?
Up to 50% recycle does not affect necessary properties, study finds.
Yes, as long as the recycled proportion does not exceed 50%. That’s according to a new study by , Holland, Ohio. “Even at 100% rPET resin use, the performance of the bottle used in this study was still acceptable,” said Tracy Momany, v.p. of PTI’s product development group. “However, the typically thicker walls of hot-fill bottles may result in slightly more noticeable haze or yellowing than in other applications such as very thin-walled water bottles.” The study used a commercial, 500-ml, 27-g, six-panel hot-fill bottle made of virgin PET and two different rPET resins added at 25%, 50%, and 100% levels. The bottles were tested for hot-fill and topload performance, wall thickness, color, haze, crystallinity, and acetaldehyde (AA) content. All samples passed the standard performance specs for hot-fill bottles. Shrinkage increased slightly with recycled content above 50%, but the bottles remained within spec. The main drawbacks of high rPET content were aesthetic—increased yellowing and haze.
Related Content
-
First Water Bottles With Ultrathin Glass Coating
Long used for sensitive juices and carbonated soft drinks, KHS Freshsafe PET Plasmax vapor-deposited glass coating is now providing freshness and flavor protection for PET mineral water bottles.
-
Coca-Cola’s Redesign of Small PET Bottles Pushes Lightweighting Below Prior ‘Floor’
Coca-Cola thought it had reached the limits of lightweighting for its small PET carbonated soft drink bottles. But a “complete redesign” led to a further 12% reduction.
-
For Extrusion and Injection-Blow Molders, Numerous Upgrades in Machines and Services
Uniloy is revising its machinery lines across the board and strengthening after-sales services in tooling maintenance, spare parts and tech service.
